Wednesday, 31 December 2014

6 Ways to Hack a Facebook Account


 
6 Ways to hack a Facebook account, something most of our readers always wanted to Learn,
something new about Facebook Hacking. Learn the best attacks for Facebook Hacking with
their advantages and drawbacks.
Note:- This tutorial is for educational purpose only and may not be used for any blackhat
purpose. The prime aim of this tutorial is to create awareness so that you guys can protect
yourself from getting hacked.
Before learning the actual procedure you should know about different types of attacks,
their drawbacks and prevention against these
attacks .


5 Ways to Hack a Facebook Account |
Facebook Hacking


1) Phishing:
The first and very basic way of hacking Facebook accounts is via Phishing. Phishing is
actually creating fake web pages to steal user’s credentials like email, passwords, phone
no,etc.


DRAWBACK:
Users nowadays are aware of these type of attacks and one can not be easily fooled using
this attack. You need some social engineering to trick someone.

Prevention:
Always check the page URL before logging in. This is the most trusted and effective way one
can use to avoid himself from phishing. Other way is to use some good Antivirus
software which will warn you if you visit a harmful phishing page.
Even if somehow you have already entered your credentials in a phisher, immediately
Change your password.


2) Key logging:
This is another good way of hacking Facebook
accounts. In this type of attack a hacker
simply sends an infected file having key logger
in it to the victim. If the victim executes that
file on his pc, whatever he types will be
mailed/uploaded to hacker’s server. The
advantage of this attack is that the victim
won’t know that hacker is getting every Bit of
data he is typing. Another big advantage is that
hacker will get passwords of all the accounts
used on that PC.
DRAWBACK :
Keyloggers are often detected as threats by
good antiviruses. Hacker must find a way to
protect it from antivirus.
Prevention :
Execute the file only if you trust the sender.
Use online scanner such as novirusthanks.org
Use good antivirus and update it regularly .
3) Trojans/backdoors :
This is an advanced level topic. It consists of a
server and a client. In this type of attack the
attacker sends the infected server to the
victim. After execution the infected server i.e.
Trojan on the victim’s PC opens a backdoor
and now the hacker can do whatever he wants
with the victim’s PC .
DRAWBACK :
Trojans are often detected as threats by good
antiviruses. Hacker must find a way to protect
it from antivirus.
Prevention :
Execute the file only if you trust the sender.
Use online scanner such as novirusthanks.org
Use good antivirus and update it regularly .
4)Sniffing
It consists of stealing session in progress. In
this type of attack an attacker makes
connection with server and client and relays
message between them, making them believe
that they are talking to each other directly.
DRAWBACK :
If user is logged out then attacker is also
logged out and the session is lost.
It is difficult to sniff on SSL protected
networks.
Prevention :
Always use SSL secured connections.
Always keep a look at the url if the http:// is
not changed to https:// it means that sniffing
is active on your network.
5)Social Engineering :
This method includes guessing and fooling the
clients to give their own passwords. In this
type of attack, a hacker sends a fake mail
which is very convincing and appealing and
asks the user for his password.
Answering the security questions also lies
under this category.
Drawback :
It is not easy to convince someone to make
him give his password.
Guessing generally doesn’t always work
( Although if you are lucky enough it may
work!).
Prevention :
Never give your password to anyone
Don’t believe in any sort of emails which asks
for your password
6) Session Hijacking
In a session hijacking attack an attacker steals
victims cookies, cookies stores all the
necessary logging Information about one’s
account, using this info an attacker can easily
hack anybody’s account. If you get the cookies
of the Victim you can Hack any account the
Victim is Logged into i.e. you can hack
Facebook, Google, Yahoo.
Drawbacks :
You will be logged out when user is logged out.
You will not get the password of the user’s
account.
Will not work if the user is using HTTPS
connections.
Prevention :
Always work on SSL secured connections.
Always keep a look at the url if the http:// is
not changed to https:// it means that sniffing
is active on your network.


Monday, 29 December 2014

How To Close Ports



So i've been looking for a while on just how to close a port on a computer. I simply
couldn't find a way. Well, i finally found it. This'll only work for windows users (unless
your unix version OS has netsh).

it's actually quite simple. here's the command for it:
netsh firewall delete portopening TCP portnumber
it's that simple.
 Simply go to START -> RUN -> and type in that command up there,
and it'll close it for you.
or, you can also open up command prompt (START -> RUN -> CMD) and type in "netsh"
without the quotes to get to your windows firewall settings.
however, since i'm such a nice guy, i wrote it all out in a vbs script for you so that it's
automatically runable. as well as a batch script. so here you are fellas:

.VBS Script
set ss = createobject("wscript.shell")
set ws = wscript
dim PORT
PORT = InputBox("Enter the port you wish to close:")
ss.run "netsh.exe"
ws.sleep 1000
ss.sendkeys "firewall delete portopening TCP " & PORT
ss.sendkeys "{enter}"
ws.sleep 500
'ss.sendkeys "exit"
'ss.sendkeys "{enter}"
.BAT Script
@echo off
title Port Closer
echo Port Closer
echo.
set /p port=Type the port number you wish to close here:
netsh firewall delete portopening TCP %port%
msg /w * Port %port% has been closed.
exit

How to Get Unlimited Time in Internet Café's



Today we're going to learn how to disable the timer on the computers in Internet
Cafe's.
Let's go through the steps, shall we?

1. Create a New Text Document.

2. Then type CMDin it.

3. And then save it as anything.bat
(Make sure the file do NOT end on .txt, but on .bat)

4. Go to the location were you saved the .bat file and run it. If you've done this
correctly, you'll see that Command Prompt is open.

5. Now that Command Prompt is open, type in: cd\windows
(This will change the directory to Windows)

6. Then type in: regedit
(This will get you to the registry editor gui)

7. Now navigate to:
HKEY_CURRENT_USER>Appevents>software>classes>microsoft>windows>current
version>internet settings>policies>system

8.Then on the right pane where it says Disable Taskmanager, right click on it, and
scroll down to modify, and than change the value of it to "0".

9.And then open Windows Task Manager
(CTRL+ALT+DELETE)

10. And then disable the Internet Cafe's timer.
If you did this right, then you're done! Well done :D

How to GRAB IP address with PHP


Today I’ll be showing you how to grab somebodies IP address when they visit a page.
The variable to use is $_SERVER['REMOTE_ADDR'] - It’s that simple. You can use it
for just about anything, here are a few examples.
Printing the Users IP Address:
<?php
print ($_SERVER['REMOTE_ADDR'], "I'm Watching You!");
?>
Printing it to a File:
<?php
$ip = $_SERVER['REMOTE_ADDR'];
$handle = fopen('ipaddresses.txt'', 'a+);
fwrite($handle, $ip); fwrite($handle, "\n");
fclose($handle);
?>
All you have to do, is to make a text file and insert any of these codes or one of your
own and save it as anythingyouwant.php
Then upload it to your website and it'll do the trick :P
The Possibilities for what you can use this to are endless

Secret Hack Codes for Android Mobile Phones


Secret Hack Codes for Android Mobile PhonesSecret Hack codesare those codes which are usually hidden from users for any misuse and exploit.
 As we all know android is very new platform and thus very fewhack codes of androidsare there on internet. Today i am sharing all thehack codes of androids cellphonesthat i know.
And i surely hope you can’t find codes better than that. So friends let’s hack and explore our android Phones.
 I have tested these codes on myPhone Samsung Notehaving anAndroid OS version 2.2. I am sure these will work on all previous versions.Secret Hacking codes for Android Mobile Phones:

1.Complete Information About your Phone *#*#4636#*#*This code can be used to get some interesting information about your phone andbattery. It shows following 4 menus on screen:*.Phone information*.Battery information*.Battery history*.Usage statistics

2. Factory data reset*#*#7780#*#*This code can be used for afactory data reset. It’ll remove following things:*.Google account settings stored in your phone*.System and application data and settings*.Downloaded applicationsIt’ll NOT remove:*.Current system software and bundled application*.SD card files e.g. photos, music files, etc.Note:Once you give this code, you get a prompt screen asking you to click on “Reset phone” button. So you get a chance to cancelyour operation.

3.Format Android Phone*2767*3855#Think before you give this code. This code is used for factory format. It’ll remove all files and settings including the internal memory storage.
It’ll also reinstall the phone firmware.Note:Once you give this code, there is no way to cancel the operation unless you remove the battery from the phone. So think twice before giving this code.

4. Phone Camera Update*#*#34971539#*#*This code is used to get information about phone camera. It shows following 4 menus:*.Update camera firmware in image (Don’t try this option)*.Update camera firmware in SD card*.Get camera firmware version*.Get firmware update countWARNING:Never use the first option otherwise your phone camera will stop working and you’ll need to take your phone toservice center to reinstall camera firmware.

5. End Call/Power*#*#7594#*#*This one is my favorite one. This code can beused to change the “End Call / Power” button action in your phone. Be default, if youlong press the button, it shows a screen asking you to select any option from Silent mode, AirPlane mode and Power off.You can change this action using this code. You can enable direct power off on this button so you don’t need to waste your time in selecting the option.
6. File Copy for Creating Backup*#*#273283*255*663282*#*#*This code opens a File copy screen where you can backup your media files e.g. Images,Sound, Video and Voice memo.

7. Service Mode*#*#197328640#*#*This code can be used to enter into Service mode. You can run various tests and change settings in the service mode.

8.WLAN, GPS and Bluetooth Test Codes:*#*#232339#*#*OR*#*#526#*#*OR*#*#528#*#* – WLAN test (Use “Menu” button to start various tests)*#*#232338#*#* – Shows WiFi MAC address*#*#1472365#*#* – GPS test*#*#1575#*#* – Another GPS test*#*#232331#*#* – Bluetooth test*#*#232337#*# – Shows Bluetooth device address

9.Codes to get Firmware version information:*#*#4986*2650468#*#*– PDA, Phone, H/W, RFCallDate*#*#1234#*#*– PDA and Phone*#*#1111#*#*– FTA SW Version*#*#2222#*#*– FTA HW Version*#*#44336#*#*– PDA, Phone, CSC, Build Time, Changelist number

10.Codes to launch various Factory Tests:*#*#0283#*#*– Packet Loopback*#*#0*#*#*– LCD test*#*#0673#*#*OR*#*#0289#*#*– Melody test*#*#0842#*#*– Device test (Vibration test and BackLight test)*#*#2663#*#*– Touch screen version*#*#2664#*#*– Touch screen test*#*#0588#*#*– Proximity sensor test*#*#3264#*#*– RAM version

Sunday, 28 December 2014

Top 6 ‪#‎White_Hat_Hackers‬ In The World




#‎1_Stephen_Wozniak:
Stephen Wozniak, The Great Woz, as many hackers call him, moreover, he is “the second half” of Steve Jobs and Apple empire, became as an icon and inspiration for many people, who never lost interest in computer technology. What did he actually do? It is well-known today that he made free long-distance calls possible exploring so-called blue boxes, at the time, when high technology has made its first baby steps. Nevertheless, one should accept that Woz is an independent developer and worked for the good of people. Currently, Stephen Wozniak is preaching charity and provides new technologies. One can truly say that Stephen Wozniak made a difference in this world and he deserves to be called as a white hat hacker.
#‎2_Tim_Berners-Lee :
Tim Berners-Lee is well-known around the world as fonder of the web we use - World Wide Web. No wonder that this man invented his first computer using iron, as they say necessity is the mother of invention. Doubtless, his innovating had led him to becoming a president of the Open Data Institute in 2012.
#‎3_Linus_Torvals :
Linus Torvals created Linux operation system, which many of us use. At the beginning, this system was about to be called as Freax, using the combination of words “ freak” and “free”. Luckily, nowadays we know it as Linux. As Linus himself once said that all he wanted to have fun doing something he really enjoys. This seems to confirm the idea that it is the great result of having fun!
#‎4_Tsutomu_Shimomura :
Tsutomu Shimomura is also a very good example of a white hat hacker. The bottom line is he tracked down another hacker – Kevin Mitnick, who actually was a black hat hacker. However, later on he has entered the ranks of white hats. Tsutomu Shimomura caught Mitnick with flying colors hacking Mitnick’s phone. Good job catching “black knight”. Currently Shimomura is CEO and CTO of Neofocal System.
#‎5_Richard_Matthew_Stallman :
Richard Matthew Stallman is known also by his initials – RMS. His policy is to give users freedom of usage software as well as education, freedom of voice and choice. He has developed Free software foundation, GNU project, which allows use computer and its devices for free
What is more, RMS is a founder of copyright concept. Among the list if his merits are 14 doctorates and professorships.
#‎6_Johanna_Rutkowska:
When it goes about technology and computers, most of the time we mentioned men. Women weren’t pathfinders in this area, however, they have done enough to be mentioned among outstanding white hats. Thus, this smart lady could hide root kits in software and hardware and to make them invisible to a naked eye. One must admit the talent of he woman. To draw the conclusion, one can say that enumerated people have brought its own contribution in foundation and innovation of computer technologies. Until the world has such brainy “white knights”, its save.

How To Hack Into A Computer On LAN




                                    NetBIOS Hacking

What is it?-NetBIOS Hacking is the art of hacking into someone else’s computer through your
Computer. NetBIOS stands for “Network Basic Input Output System.” It is a way for
a LAN or WAN to share folders, files, drives, and printers.
-How can this be of use to me?-Most people don’t even know, but when they’re on a LAN or WAN they could possibly
have their entire hard drive shared and not even know. So if we can find a way into
the network, their computer is at our disposal.
-What do I need?-Windows Os

Cain and Abel (oxid.it - Home)

-[Step 1, Finding the target.]

So first off we need to find a computer or the computer to hack into. So if your
plugged in to the LAN, or connected to the WAN, you can begin. Open up Cain and
Abel. This program has a built in sniffer feature. A sniffer looks for all IP addresses
in the local subnet. Once you have opened up the program click on the sniffer tab,
click the Start/Stop sniffer, and then click the blue cross
Another window will pop up, make sure “All host in my subnet” is selected, and then
click ok. 

It should begin to scan.
Then IP’s, computer names, and mac addresses will show up.
Now remember the IP address of the computer you are going to be breaking into.

If you can’t tell whether the IP address is a computer, router, modem, etc, that’s ok.

During the next step we will begin our trial and error. 

[Part 2, Trial and Error]-

Now, we don’t know if we have our designated target, or if we have a computer or
printer, or whatever else is on the LAN or WAN.
If you did get the IP of the target though, I still recommend reading through this
section, for it could be helpful later on.

Click on the start menu and go to run, type in cmd, and click ok.
This should bring up the command prompt.

From here we will do most of the hacking.
Now I will be referring to certain commands that need to be inputted into the
Command prompt.

I will put these commands in quotes, but do not put the quotes in the code when you
type it into the prompt.

I am only doing this to avoid confusion.
Let’s get back to the hacking.

Type in “ping (IP address of the target).” For example in this tutorial, “ping
192.168.1.103.”
This will tell us if the target is online.
If it worked, it will look something like this (note, I have colored out private
information):
IF it didn’t work, meaning that the target is not online, it will look something like this:

If the target is not online, either switch to a different target, or try another time.

If the target is online, then we can proceed. 

-[Part 3, Gathering the Information.]

Now, input this command “nbtstat –a (IP address of target).” An example would be
“Nbtstat –a 192.168.1.103.”
This will show us if there is file sharing enabled, and if there is, it will give us the:

Currently logged on user, work group, and computer name.
Ok, you’re probably wondering, “What does all this mean to me?” Well, this is actually
Very important, without this, the hack would not work. So, let me break it down from
The top to bottom. I will just give the first line of information, and then explain the
Paragraph that follows it.
The information right below the original command says: “Local Area Connection,” this
Information tells us about our connection through the LAN, and in my case, I am not
Connected through LAN, so the host is not found, and there is no IP.

The information right below the “Local Area Connection,” is “Wireless Network
Connection 2:” It gives us information about the connection to the target through
WAN. In my case I am connected through the WAN, so it was able to find the Node
IpAddress. The Node IpAddress is the local area IP of the computer you are going to
break into.

The NetBIOS Remote Machine Name Table, give us the work group of our computer,
tells us if it is shared, and gives us the computer name. Sometimes it will even give us
the currently logged on user, but in my case, it didn’t. BAT GIRL is the name of the
computer I am trying to connect to. If you look to the right you should see a <20>.

This means that file sharing is enabled on BAT GIRL. If there was not a <20> to the
right of the Name, then you have reached a dead end and need to go find another IP,
or quit for now. Below BATGIRL is the computers workgroup, SUPERHEROES. 
If you
are confused about which one is the workgroup, and the computer, look under the
Type category to the right of the < > for every Name. If it says UNIQUE, it is one
system, such as a printer or computer. If it is GROUP, then it is the work group




-[Step 4, Breaking In]


Finally it’s time.

By now we know: that our target is online, our target has file sharing, and our target’s
Computer name.
So it’s time to break in.

We will now locate the shared drives, folders, files, or printers. Type in “net view \\
(IP Address of Target)”
An example for this tutorial would be: “net view \\192.168.1.103”
We have our just found our share name. In this case, under the share name is “C,”
meaning that the only shared thing on the computer is C. Then to the right, under
Type, it says “Disk.” This means that it is the actual C DISK of the computer. The C
DISK can sometimes be an entire person’s hard drive.
All's that is left to do is “map” the shared drive onto our computer. This means that
we will make a drive on our computer, and all the contents of the targets computer
can be accessed through our created network drive. Type in “net use K: \\(IP
Address of Target)\(Shared Drive). For my example in this tutorial, “net use
K: \\192.168.1.103\C.” Ok, let’s say that you plan on doing this again to a different
person, do u see the “K after “net use?” This is the letter of the drive that you are
making on your computer. It can be any letter you wish, as long as the same letter is
not in use by your computer. So it could be “net use G...,” for a different target. 

As you can see, for my hack I have already used “K,” so I used “G” instead.
You may also do the same for multiple hacks.
If it worked, it will say “The command completed successfully.”
If not, you will have to go retrace you steps.
Now open up “my computer” under the start menu, and your newly created network
drive should be there. 

Now, if you disconnect from the WAN or LAN, you will not be able to access this
drive, hence the name Network Drive.

The drive will not be deleted after you disconnect though, but you won’t be able to
access it until you reconnect to the network.
So if you are doing this for the content of the drive, I recommend dragging the files
and folders inside of the drive onto your computer,
because you never know if the target changes the sharing setting.
Congratulations! You’re DONE!

-Commands used in this tutorial:
PING
NBTSTAT -a (IP Address of Target)
NET VIEW \\(IP Address of Target)
NET USE K: \\(IP Address of Target)\(SHARENAME)
-Program used in this tutorial:

Cain and Abel

How to hack someone with his IP address





                               Introduction  

1. Welcome to the basic NETBIOS document created by aCId_rAIn. This document
will teach you some simple things about NETBIOS, what it does, how to use it, how to
hack with it, and some other simple DOS commands that will be useful to you in the
future. 

1. Hardware and Firmware

1a. The BIOS
The BIOS, short for Basic Input/output Services, is the control program of the PC.
It is responsible for starting up your computer, transferring control of the system to
your operating system, and for handling other low-level functions, such as disk access.
NOTE that the BIOS is not a software program, insofar as it is not purged from
memory when you turn off the computer. It's
firmware, which is basically software on a chip.
A convenient little feature that most BIOS manufacturers include is a startup
password. This prevents access to the system until you enter the correct password.
If you can get access to the system after the password has been entered, then there
are numerous software-based BIOS password extractors available from your local
H/P/A/V site.
NETBIOS/NBTSTAT - What does it do?

2. NETBIOS, also known as NBTSTAT is a program run on the Windows system and is
used for identifying a remote network or computer for file sharing enabled. We can
expoit systems using this method. It may be old but on home pc's sometimes it still
works great. You can use it on your friend at home or something. I don't care what
you do, but remember, that you are reading this document because you want to learn.
So I am going to teach you. Ok. So, you ask, "How do i get to NBTSTAT?" Well, there
are two ways, but one's faster.

Method 1:Start>Programs>MSDOS PROMPT>Type NBTSTAT

Method 2:Start>Run>Type Command>Type NBTSTAT

(Note: Please, help your poor soul if that isn't like feeding you with a baby spoon.)
Ok! Now since you're in the DOS command under NBTSTAT, you're probably
wondering what all that crap is that's on your screen. These are the commands you
may use.
Your screen should look like the following:
NBTSTAT [ [-a RemoteName] [-A IP address] [-c] [-n]
[-r] [-R] [-RR] [-s] [-S] [interval] ]
-a (adapter status) Lists the remote machine's name table given its name
-A (Adapter status) Lists the remote machine's name table given its IP address.
-c (cache) Lists NBT's cache of remote [machine] names and their IP addresses
-n (names) Lists local NetBIOS names.
-r (resolved) Lists names resolved by broadcast and via WINS
-R (Reload) Purges and reloads the remote cache name table
-S (Sessions) Lists sessions table with the destination IP addresses
-s (sessions) Lists sessions table converting destination IP addresses to computer

NETBIOS names.

-RR (ReleaseRefresh) Sends Name Release packets to WINS and then, starts
Refresh
RemoteName Remote host machine name.
IP address Dotted decimal representation of the IP address.
interval Redisplays selected statistics, pausing interval seconds between each display.

Press Ctrl+C to stop redisplaying
statistics.

C:\WINDOWS\DESKTOP>
The only two commands that are going to be used and here they are:
-a (adapter status) Lists the remote machine's name table given its name
-A (Adapter status) Lists the remote machine's name table given its IP address.
Host Names

3. Now, the -a means that you will type in the HOST NAME of the person's computer
that you are trying to access. Just in case you don't have any idea what a Host Name
looks like here's an example.
123-fgh-ppp.internet.com
there are many variations of these adresses. For each different address you see
there is a new ISP assigned to that computer. look at the difference.
abc-123.internet.com
ghj-789.newnet.com
these are differnet host names as you can see, and, by identifying the last couple
words you will be able to tell that these are two computers on two different ISPs.

Now, here are two host names on the same ISP but a different located server.
123-fgh-ppp.internet.com
567-cde-ppp.internet.com
IP Addresses

4. You can resolce these host names if you want to the IP address (Internet Protocol)

IP addresses range in different numbers. An IP looks like this:
201.123.101.123

Most times you can tell if a computer is running on a cable connection because of the

IP address's numbers. On faster connections, usually the first two numbers are low.

here's a cable connection IP.
24.18.18.10
on dialup connections IP's are higher, like this:
208.148.255.255
notice the 208 is higher than the 24 which is the cable connection.

REMEMBER THOUGH, NOT ALL IP ADDRESSES WILL BE LIKE THIS.

Some companies make IP addresses like this to fool the hacker into believing it's a
dialup, as a hacker would expect something big, like a T3 or an OC-18. Anyway This
gives you an idea on IP addresses which you will be using on the nbtstat command.

Getting The IP Through DC (Direct Connection)

5. First. You're going to need to find his IP or host name. Either will work. If you are on mIRC You can get it by typing /whois (nick) ...where (nick) is the persons nickname without parenthesis. you will either get a host name or an IP. copy it down. If you do 

not get it or you are not using mIRC then you must direct connect to their computer
or you may use a sniffer to figure out his IP or host name. It's actually better to do
it without the sniffer because most sniffers do not work now-a-days. So you want to
establish a direct connection to their computer. OK, what is a direct connection?

When you are:
Sending a file to their computer you are directly connected.
AOL INSTANT MESSENGER allows a Direct Connection to the user if accepted.
ICQ when sending a file or a chat request acception allows a direct connection.

Any time you are sending a file. You are directly connected. (Assuming you know the
user is not using a proxy server.)

Voice Chatting on Yahoo establishes a direct connection.
If you have none of these programs, either i suggest you get one, get a sniffer, or
read this next statement.
If you have any way of sending thema link to your site that enables site traffic
statistics, and you can log in, send a link to your site, then check the stats and get
the IP of the last visitor.

 It's a simple and easy method i use. It even fool some
smarter hackers, because it catches them off guard. 
Anyway, once you are directly
connected use either of the two methods i showed you earlier and get into DOS. Type

NETSTAT -n. NETSTAT is a program that's name is short for NET STATISTICS. It

will show you all computers connected to yours. (This is also helpful if you think you
are being hacked by a trojan horse and is on a port that you know such as Sub Seven:
27374.) 

Your screen should look like this showing the connections to your computer:
------------------------------------------------------------------------------------------------C:\WINDOWS\DESKTOP>netstat -n
Active Connections
Proto Local Address Foreign Address State
TCP 172.255.255.82:1027 205.188.68.46:13784 ESTABLISHED
TCP 172.255.255.82:1036 205.188.44.3:5190 ESTABLISHED
TCP 172.255.255.82:1621 24.131.30.75:66 CLOSE_WAIT
TCP 172.255.255.82:1413 205.188.8.7:26778 ESTABLISHED
TCP 172.255.255.82:1483 64.4.13.209:1863 ESTABLISHED
C:\WINDOWS\DESKTOP>
------------------------------------------------------------------------------------------------The first line indicated the Protocol (language) that is being used by the two
computers.
TCP (Transfer Control Protocol) is being used in this and is most widely used.
Local address shows your IP address, or the IP address of the system you on.
Foreign address shows the address of the computer connected to yours.

State tells you what kind of connection is being made ESTABLISHED - means it will
stay connected to you as long as you are on the program or as long as the computer is
allowing or is needing the other computers connection to it. CLOSE_WAIT means the
connection closes at times and waits until it is needed or you resume connection to be
made again. One that isn't on the list is TIME_WAIT which means it is timed. Most
Ads that run on AOL are using TIME_WAIT states.
the way you know the person is directly connected to your computer is because of
this:

------------------------------------------------------------------------------------------------C:\WINDOWS\DESKTOP>netstat -n
Active Connections
Proto Local Address Foreign Address State
TCP 172.255.255.82:1027 205.188.68.46:13784 ESTABLISHED
TCP 172.255.255.82:1036 205.188.44.3:5190 ESTABLISHED
TCP 172.255.255.82:1621 24.131.30.75:66 CLOSE_WAIT
TCP 172.255.255.82:1413 abc-123-ppp.webnet.com ESTABLISHED
TCP 172.255.255.82:1483 64.4.13.209:1863 ESTABLISHED
C:\WINDOWS\DESKTOP>
------------------------------------------------------------------------------------------------
Notice the host name is included in the fourth line instead of the IP address on all.
This is almost ALWAYS, the other computer that is connected to you. So here, now,
you have the host name:
abc-123-ppp.webnet.com
If the host name is not listed and the IP is then it NO PROBLEM because either one
works exactly the same. I am using abc-123-ppp.webnet.com host name as an example.
Ok so now you have the IP and/or host name of the remote system you want to
connect to. 

Time to hack!
Open up your DOS command. Open up NBTSTAT by typing NBTSTAT. Ok, there's
the crap again. Well, now time to try out what you have leanred from this document
by testing it on the IP and/or host name of the remote system. Here's the only thing
you'll need to know.

IMPORTANT, READ NOW!!!

-a (adapter status) Lists the remote machine's name table given its name
-A (Adapter status) Lists the remote machine's name table given its IP address.
Remember this?
Time to use it.
-a will be the host name
-A will be the IP
How do i know this?
Read the Statements following the -a -A commands. It tells you there what each
command takes.
So have you found which one you have to use?
GOOD!
Time to start.

Using it to your advantage

6. Type this if you have the host name only.
NBTSTAT -a (In here put in hostname without parenthesis)
Type this is you have the IP address only.
NBTSTAT -A (In here put in IP address without parenthesis)
Now, hit enter and wait. Now Either one of two things came up

1. Host not found

2. Something that looks like this:
--------------------------------------------NetBIOS Local Name Table
Name Type Status
---------------------------------------------GMVPS01 <00> UNIQUE Registered
WORKGROUP <00> GROUP Registered
GMVPS01 <03> UNIQUE Registered
GMVPS01 <20> UNIQUE Registered
WORKGROUP <1E> GROUP Registered
---------------------------------------------If the computer responded "Host not found" Then either one of two things are the
case:

1. You screwed up the host name.
2. The host is not hackable.
If number one is the case you're in great luck. If two, This system isn't hackable
using the NBTSTAT command. So try another system.
If you got the table as above to come up, look at it carefully as i describe to you each
part and its purpose.

Name - states the share name of that certain part of the computer
<00>, <03>, <20>, <1E> - Are the Hexidecimal codes giving you the services available on
that share name.
Type - Is self-explanatory. It's either turned on, or activated by you, or always on.
Status - Simply states that the share name is working and is activated.
Look above and look for the following line:
GMVPS01 <20> UNIQUE Registered
See it?
GOOD! Now this is important so listen up. The Hexidecimanl code of <20> means that
file sharing is enabled on the share name that is on that line with the hex number. So
that means GMVPS01 has file sharing enabled. So now you want to hack this. Here's
How to do it. (This is the hard part)
LMHOST File

7. There is a file in all Windows systems called LMHOST.sam. We need to simply add
the IP into the LMHOST file because LMHOST basically acts as a network,
automatically logging you on to it. So go to Start, Find, FIles or Folders. Type in
LMHOST and hit enter. when it comes up open it using a text program such as
wordpad, but make sure you do not leave the checkmark to "always open files with
this extension" on that. Simply go through the LMHOST file until you see the part:
# This file is compatible with Microsoft LAN Manager 2.x TCP/IP lmhosts
# files and offers the following extensions:
#
# #PRE
# #DOM:
# #INCLUDE
# #BEGIN_ALTERNATE
# #END_ALTERNATE
# \0xnn (non-printing character support)
#
# Following any entry in the file with the characters "#PRE" will cause
# the entry to be preloaded into the name cache. By default, entries are
# not preloaded, but are parsed only after dynamic name resolution fails.
#
# Following an entry with the "#DOM:" tag will associate the
# entry with the domain specified by . This affects how the
# browser and logon services behave in TCP/IP environments. To preload
# the host name associated with #DOM entry, it is necessary to also add a
# #PRE to the line. The is always preloaded although it will not
# be shown when the name cache is viewed.
#
# Specifying "#INCLUDE " will force the RFC NetBIOS (NBT)
# software to seek the specified and parse it as if it were
# local. is generally a UNC-based name, allowing a
# centralized lmhosts file to be maintained on a server.
# It is ALWAYS necessary to provide a mapping for the IP address of the
# server prior to the #INCLUDE. This mapping must use the #PRE directive.
# In addtion the share "public" in the example below must be in the
# LanManServer list of "NullSessionShares" in order for client machines to
# be able to read the lmhosts file successfully. This key is under
# \machine\system\currentcontrolset\services\layman’s
erver\parameters\nullsessionshares
# in the registry. Simply add "public" to the list found there.
#
# The #BEGIN_ and #END_ALTERNATE keywords allow multiple #INCLUDE
# Statements to be grouped together. Any single successful include
# will cause the group to succeed.
#
# Finally, non-printing characters can be embedded in mappings by
# first surrounding the NetBIOS name in quotations, then using the
# \0xnn notation to specify a hex value for a non-printing character.
Read this over and over until you understand the way you want your connection to be
set. Here's an example of how to add an IP the way I would do it:
#PRE #DOM:255.102.255.102 #INCLUDE
Pre will preload the connection as soon as you log on to the net. DOM is the domain or
IP address of the host you are connecting to. INCLUDE will automaticall set you to
that file path. In this case as soon as I log on to the net I will get access to
255.102.255.102 on the C:/ drive. The only problem with this is that by doin the
NETSTAT command while you are connected, and get the IP of your machine. That's
why it only works on simple PC machines. Because people in these days are computer
illiterate and have no idea of what these commands can do. They have no idea what
NETSTAT is, so you can use that to your advantage. Most PC systems are kind of
hard to hack using this method now because they are more secure and can tell when
another system is trying to gain access. Also, besure that you (somehow) know
whether they are running a firewall or not because it will block the connection to
their computer. Most home systems aren't running a firewall, and to make it better,
they don't know how operate the firewall, therefore, leaving the hole in the system.
To help you out some, it would be a great idea to pick up on some programming
languages to show you how the computer reads information and learn some things on
TCP/IP (Transfer Control Protocol/Internet Protocol) If you want to find out
whether they are running a firewall, simply hop on a Proxy and do a port scan on their
IP. You will notice if they are running a firewall because most ports are closed. Either
way, you still have a better chance of hacking a home system than hacking Microsoft.
Gaining Access

7. Once you have added this to you LMHOST file. You are basically done. All you need
to do is go to:
Start
Find
Computer
Once you get there you simply type the IP address or the host name of the system.
When it comes up, simply double click it, and boom! There's a GUI for you so you
don't have to use DOS anymore. You can use DOS to do it, but it's more simple and
fun this way, so that's the only way i put it. When you open the system you can edit,
delete, rename, do anything to any file you wish. I would also delete the command file
in C:/ because they may use it if they think someone is in their computer. Or simply
delete the shortcut to it. Then here's when the programming comes in handy. Instead
of using the NBTSTAT method all the time, you can then program you own trojan on
your OWN port number and upload it to the system. Then you will have easier access
and you will also have a better GUI, with more features. DO NOT allow more than one
connection to the system unless they are on a faster connection. If you are
downloading something from their computer and they don't know it and their
connection is being slow, they may check their NETSTAT to see what is connected,
which will show your IP and make them suspicious. Thats it. All there is to it. Now go
out and scan a network or something and find a computer with port 21 or something
open.